DE
Biogas Technology
  • Biogas Technology Overview
  • Double Membrane Gas Holder
  • Flare
  • Blogical Desulphurization
  • Dry Type Desulphurization
  • Ceramic Filter
  • Gravel Filter
  • Combined Gas Dome
  • Contact Us
    Tel: 021-52680003
    Email: info@zcic.com.cn
    Dry Type Desulphurization
    Home > Biogas Technology
    Dry Type Desulphurization

    ENVIRONTEC DT dry type desulphurization is a simple, cost-effective and high-efficiency technology for desulphurization at low H2S inlet concentration (<2000ppm). It can be combined with biological desulphurization for higher H2S concentration application for longer operating time and best effect guarantee.

    CHARACTERISTICS

    Design for best gas speed Mass inlet and outlet hopper
    Mass lifting device and platform
    Continuous mass loading & unloading
    Ergonomic design
    Temperature and pressure monitoring
    Customer-made
    High efficiency Mass: Fe2O3.H2O
    High efficiency Mass: Active Carbon

    STRUCTURE & PRINCIPLE

    The dry type desulphurization consists of a stainless steel tank, desulphurization filling mass, inlet and outlet hoppers, mass lifting device, double air tightness valves and also pressure and temperature gauges. The filling mass can be chosen with Fe2O3.H2O or Active Carbon.
    Desulfurization plant is usually designed 1 use 1 standby. The standby tower is put into use when another tower has to be bypassed to change the filling mass completely. Environtec has designed special mass inlet and outlet hoppers with double air tightness valves. This means the filling mass can be replaced continuously everyday or every week with small amount during operation, so that one tower is enough.
    When the raw gas enters the bottom of desulfurization tower, H2S react with fill mass (Fe2O3.H2O) with
    following the reaction:
    Fe2O3•H2O + 3 H2S === Fe2S3 + 4 H2O
    Fe2S3 + 3/2 O2 + 3 H2O === Fe2O3•H2O + 2 H2O + 3 S
    Or H2S react with Active Carbon with following reaction:
    2H2S+3O2 === 2H2O+2SO2
    H2S+2O2 === H2SO4
    2H2S+SO2 === 3S+ 2H2O
    H2SO4+H2S === S+2H2O+SO2
    1/8S8 +O2 === SO2
    Fresh desulphurization mass is fed into the reactor by a transport vessel which is lifted to the top platform. By adding oxygen, the above reactions of desulphurization and reproduction occur simultaneously. The desulphurization mass is effective until sulfur blocks the passage of biogas with big pressure loss. Then the filling mass has to be replaced.
    Environtec has researched and developed the filling mass for years. For example, the ZC-102 filling mass of Fe2O3
    reaches more than 30% working sulfur content; and the ZC-103 filling mass is able to treat H2S to 1ppm at outlet.
    As an option, Environtec has designed a special oxygen addition system. A small amount of oxygen addition contributes a lot for the mass reproduction, so as to reduce the frequency of changing the filling mass.

    scan ercode
    Private Policy
    Tel:021-52680003
    Email:info@zcic.com.cn
    Add:29I, 899 Lingling Road. Cross Region Plaza, Shanghai, China
    Copyright © 2016-2018Shanghai Zhong Cheng Environtec Co., Ltd.